Selling Price -
$28,500.00
2017 Case CE SR160
Perfect for the agricultural, rental and landscape markets, the CASE SR160 skid steer has a compact chassis making tight spaces easier to work in. This machine has an extremely low overall height, making it easy to transport with a trailer. New Tier 4 technology combined with cutting edge engineering make the SR160 the best in its class.
Features may include:
ProductivityBuilt with more torque and power, the SR160 comes with a power stance wheelbase to optimize dynamic stability while increasing maneuverability and clearance over curbs. New electronic control module and fuel system can log operating data and have CAN-bus capabilities for easy diagnostic monitoring.
Fuel EfficiencyWith more power and better fuel efficiency, the new Tier 4 engine uses CEGR technology to meet emissions regulations and maximize performance.
Comfort and VisibilityThe cab forward design along with a thin-wire side screen and standard skylight help to increase visibility from sunrise to sunset.
ServiceabilityEliminate downtime with maintenance checks made easy. All service checks are conveniently located at the rear of the machine, while the tilting cab provides easy access for repairs.
- 2017
- Case CE
- SR160
- Base
- General
- ISM N844LT-F
- Tier 4 Final
- @ 2800 RPM – SAE J1349: Gross - 60 hp (44.7 kW), Net - 57 hp (42.4 kW)
- Peak @ 1800 RPM: 139 lb·ft (188 N·m)
- Rated speed, full load: 2200 Rpm | Low idle: 900 - 1000 Rpm | High idle, no load: 2330 - 2430 Rpm
- #: 4
- 135.2 in3 (2.2 L)
- 3.31 in (84 mm)
- 3.94 in (100 mm)
- Type: Direct drive countershaft Powershift w/ electronic shift control and inching pedal
- Travel: 7.4 mph (11.9 kph)
- Gear
- 19.0 gpm (71.9 L/min) | @ rated engine RPM: @ 100% efficiency - 18.4 gpm (69.7 L/min)
- Charge: 360 psi (24.5 bar) | System relief: 5,000 psi (345 bar)
- Maximum dump angle: 40.2° | . Angle of departure: 22.0° | Clearance circle rear: 56.4 in (1.43 m)
- Operating: with foundry/excavating bucket - 141.4 in (3.59 m), with low profile bucket - 146.9 in (3.73 m), with low profile extended bucket - 152.0 in (3.86 m) | Dump reach at maximum height with low profile bucket: 22.7 in (0.58 m) @ 40.2°
- Bucket hinge pin: 112.0 in (2.85 m) | Top of ROPS: 75.5 in (1.92 m) | Bottom of level bucket, fully raised: 105.6 in (2.68 m) | Dump: with foundry/excavating bucket - 88.4 in (2.25 m) @ 40.2°, with low profile bucket - 84.8 in (2.15 m) @ 40.2°
- without attachment with coupler - 95.9 in (2.44 m) | F. with foundry/excavating bucket on ground: 119.2 in (3.03 m) | with low profile bucket: 125.0 in (3.18 m) | with low profile extended bucket: 129.8 in (3.30 m)
- Over the tire spec tires: 59.0 in (1.50 m)
- bottom of belly pan: 7.0 in (0.18 m)
- 37.0 in (0.94 m)
- Voltage: 24 Volts, negative ground | Starter: 2.95 hp (2.2 kW)
- 120 amp
- 12-volt low-maintenance 925 cold-cranking amps @ 0° F (-18° C°)
- Spring-applied, hydraulic release multiple disc.
- 16.0 gal (60.5 L)
- Engine w/ filter: 7.5 qt (7.1 L)
- Hydraulic system: Total - 7.71 gal (29.2 L), Reservoir - 4.0 gal (15.1 L)
- Unit equipped w/ open cab; 165 lb operator; 60 in Dirt & Foundry bucket; full of fuel; 10 x 16.5 tires: 5,510 lb (2 505 kg) | Shipping: 5,210 lb (2 370 kg)
- $28,500.00
- Chandler, Arizona
- Pre-Owned
- 2017
- Case CE
- SR160
- ISM N844LT-F
- Diesel
- Available
- Over the tire spec tires: 59.0 in (1.50 m)
- Bucket hinge pin: 112.0 in (2.85 m) | Top of ROPS: 75.5 in (1.92 m) | Bottom of level bucket, fully raised: 105.6 in (2.68 m) | Dump: with foundry/excavating bucket - 88.4 in (2.25 m) @ 40.2°, with low profile bucket - 84.8 in (2.15 m) @ 40.2°